View STGB5NC60KD_5409394.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/11 target specification february 2005 stgp5nc60kd - stgf5nc60kd STGB5NC60KD n-channel 5a - 600v - to-220/to-220fp/d 2 pak short circuit rated powermesh? igbt table 1: general features off losses include tail current low on-voltage drop (v cesat ) short circuit rated switching losses include diode recovery energy lower c res / c ies ratio description using the latest high voltage technology based on a patented strip layout, stmicroelectronics has designed an advanced family of igbts, the pow- ermesh ? igbts, with outstanding performances. the suffix ?k? identifies a family optimized for high frequency motor control applications with short cir- cuit withstand capability. applications high frequency motor controls smps and pfc in both hard switch and resonant topologies motor drivers table 2: order codes figure 1: package figure 2: internal schematic diagram type v ces v ce(sat) (max) @25c i c @100c STGB5NC60KD stgf5nc60kd stgp5nc60kd 600 v 600 v 600 v < 2.5 v < 2.5 v < 2.5 v 10 a 10 a 10 a 1 2 3 to-220fp to-220 1 2 3 1 3 d 2 pak sales type marking package packaging STGB5NC60KDt4 gb5nc60kd d 2 pak tape & reel stgf5nc60kd gf5nc60kd to-220fp tube stgp5nc60kd gp5nc60kd to-220 tube rev. 1
stgp5nc60kd - STGB5NC60KD - stgf5nc60kd 2/11 table 3: absolute maximum ratings ( )pulse width limited by max. junction temperature. table 4: thermal data electrical characteristics (t case =25 c unless otherwise specified) table 5: main parameters (#) calculated according to the iterative formula: symbol parameter value unit STGB5NC60KD stgp5nc60kd stgf5nc60kd v ces collector-emitter voltage (v gs = 0) 600 v v ecr emitter-collector voltage 20 v v ge gate-emitter voltage 20 v i c collector current (continuous) at t c = 25 c (#) 20 a i c collector current (continuous) at t c = 100 c (#) 10 a i cm ( ) collector current (pulsed) 40 a p tot total dissipation at t c = 25 c 60 25 w derating factor 0.48 0.20 w/ c v iso insulation withstand voltage a.c.(t = 1 sec; tc = 25 c) -- 2500 v t stg storage temperature ? 55 to 150 c t j operating junction temperature min. typ. max. rthj-case thermal resistance junction-case to-220 d2pak 2.08 c/w to-220fp 5.0 c/w rthj-amb thermal resistance junction-ambient 62.5 c/w t l maximum lead temperature for soldering purpose (1.6 mm from case, for 10 sec.) 300 c symbol parameter test conditions min. typ. max. unit v br(ces) collector-emitter breakdown voltage i c = 250 a, v ge = 0 600 v i ces collector cut-off current (v ge = 0) v ce = max rating, t c = 25 c v ce =max rating, t c = 125 c 250 2 a ma i ges gate-emitter leakage current (v ce = 0) v ge = 20v , v ce = 0 250 na v ge(th) gate threshold voltage v ce = v ge , i c = 250 a 57v v ce(sat) collector-emitter saturation voltage v ge = 15v, i c = 5a v ge = 15v, i c = 5a, tc= 125 c 2 1.8 2.5 v v i c t c () t jmax t c ? r thj c ? v cesat max () t c i c , () -------------------------------------------------------------------------------------------------- =
3/11 stgp5nc60kd - STGB5NC60KD - stgf5nc60kd electrical characteristics (continued) table 6: dynamic (1) pulsed: pulse duration = 300 s, duty cycle 1.5% table 7: switching on 2) eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. if the igbt is offered in a package with a co-pack diode, the co-pack diode is used as external diode. igbts & diode are at the same temperature (25 c and 125 c) table 8: switching off (3)turn-off losses include also the tail of the collector current. symbol parameter test conditions min. typ. max. unit g fs (1) forward transconductance v ce = 15 v , i c = 5 a 15 s c ies c oes c res input capacitance output capacitance reverse transfer capacitance v ce = 25v, f = 1 mhz, v ge = 0 410 48 9 pf pf pf q g q ge q gc total gate charge gate-emitter charge gate-collector charge v ce = 390 v, i c = 5 a, v ge = 15v, (see figure 5) 19 tbd tbd nc nc nc t scw short circuit withstand time v ce = 0.5 v br(ces) , tj = 125 c r g = 10 ?, v ge = 15v tbd s symbol parameter test conditions min. typ. max. unit t d(on) t r (di/dt) on eon (2) turn-on delay time current rise time turn-on current slope turn-on switching losses v cc = 390 v, i c = 5 a r g =3.3 ? , v ge = 15v, tj= 25 c (see figure 3) tbd tbd tbd tbd ns ns a/s j t d(on) t r (di/dt) on eon (2) turn-on delay time current rise time turn-on current slope turn-on switching losses v cc = 390 v, i c = 5 a r g =3.3 ? , v ge = 15v, tj=125 c (see figure 3) tbd tbd tbd tbd ns ns a/s j symbol parameter test conditions min. typ. max. unit t r (v off ) off voltage rise time v cc = 390 v, i c = 5 a, r ge = 3.3 ? , v ge = 15 v t j = 25 c (see figure 3) tbd ns t d ( off ) turn-off delay time tbd ns t f current fall time 75 ns e off (3) turn-off switching loss tbd j e ts total switching loss tbd j t r (v off ) off voltage rise time v cc = 390 v, i c = 5 a, r ge = 3.3 ? , v ge = 15 v tj = 125 c (see figure 3) tbd ns t d ( off ) turn-off delay time tbd ns t f current fall time 110 ns e off (3) turn-off switching loss tbd j e ts total switching loss tbd j
stgp5nc60kd - STGB5NC60KD - stgf5nc60kd 4/11 table 9: collector-emitter diode symbol parameter test conditions min. typ. max. unit i f i fm forward current forward current pulsed 7.5 12 a a v f forward on-voltage i f = 1.5 a i f = 1.5 a, tj = 125 c 1.6 1.3 2.9 v v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i f = 1.5 a ,v r = 30 v, tj = 25 c, di/dt = 100 a/ s (see figure 6) tbd tbd tbd ns nc a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i f = 1.5 a ,v r = 30 v, tj =125 c, di/dt = 100 a/ s (see figure 6) tbd tbd tbd ns nc a
5/11 stgp5nc60kd - STGB5NC60KD - stgf5nc60kd figure 3: test circuit for inductive load switching figure 4: switching waveforms figure 5: gate charge test circuit
stgp5nc60kd - STGB5NC60KD - stgf5nc60kd 6/11 dim. mm. inch min. typ max. min. typ. max. a 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 d 15.25 15.75 0.60 0.620 e 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 f 1.23 1.32 0.048 0.052 h1 6.20 6.60 0.244 0.256 j1 2.40 2.72 0.094 0.107 l 13 14 0.511 0.551 l1 3.50 3.93 0.137 0.154 l20 16.40 0.645 l30 28.90 1.137 ? p 3.75 3.85 0.147 0.151 q 2.65 2.95 0.104 0.116 to-220 mechanical data
7/11 stgp5nc60kd - STGB5NC60KD - stgf5nc60kd l2 a b d e h g l6 f l3 g 1 123 f 2 f 1 l7 l4 l5 dim. mm. inch min. typ max. min. typ. max. a 4.4 4.6 0.173 0.181 b 2.5 2.7 0.098 0.106 d 2.5 2.75 0.098 0.108 e 0.45 0.7 0.017 0.027 f 0.75 1 0.030 0.039 f1 1.15 1.7 0.045 0.067 f2 1.15 1.7 0.045 0.067 g 4.95 5.2 0.195 0.204 g1 2.4 2.7 0.094 0.106 h 10 10.4 0.393 0.409 l2 16 0.630 l3 28.6 30.6 1.126 1.204 l4 9.8 10.6 .0385 0.417 l5 2.9 3.6 0.114 0.141 l6 15.9 16.4 0.626 0.645 l7 9 9.3 0.354 0.366 ? 3 3.2 0.118 0.126 to-220fp mechanical data
stgp5nc60kd - STGB5NC60KD - stgf5nc60kd 8/11 to-247 mechanical data 1 dim. mm. inch min. typ max. min. typ. max. a 4.4 4.6 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.7 0.93 0.027 0.036 b2 1.14 1.7 0.044 0.067 c 0.45 0.6 0.017 0.023 c2 1.23 1.36 0.048 0.053 d 8.95 9.35 0.352 0.368 d1 8 0.315 e 10 10.4 0.393 e1 8.5 0.334 g 4.88 5.28 0.192 0.208 l 15 15.85 0.590 0.625 l2 1.27 1.4 0.050 0.055 l3 1.4 1.75 0.055 0.068 m 2.4 3.2 0.094 0.126 r0.4 0.015 v2 0 o 4 o d 2 pak mechanical data 3
9/11 stgp5nc60kd - STGB5NC60KD - stgf5nc60kd tape and reel shipment (suffix ?t4?)* tube shipment (no suffix)* d 2 pak footprint * on sales type dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0795 g 24.4 26.4 0.960 1.039 n 100 3.937 t 30.4 1.197 base qty bulk qty 1000 1000 reel mechanical data dim. mm inch min. max. min. max. a0 10.5 10.7 0.413 0.421 b0 15.7 15.9 0.618 0.626 d 1.5 1.6 0.059 0.063 d1 1.59 1.61 0.062 0.063 e 1.65 1.85 0.065 0.073 f 11.4 11.6 0.449 0.456 k0 4.8 5.0 0.189 0.197 p0 3.9 4.1 0.153 0.161 p1 11.9 12.1 0.468 0.476 p2 1.9 2.1 0.075 0.082 r 50 1.574 t 0.25 0.35 0.0098 0.0137 w 23.7 24.3 0.933 0.956 tape mechanical data
stgp5nc60kd - STGB5NC60KD - stgf5nc60kd 10/11 table 10: revision history date revision description of changes 14-feb-2005 1 new release
11/11 stgp5nc60kd - STGB5NC60KD - stgf5nc60kd information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america

▲Up To Search▲

Price & Availability of STGB5NC60KD

	To Download STGB5NC60KD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .